Dear CAD learners and users, welcome to another article of this series! As usual, I am introducing 5 CAD commands beginning with E in detail. Keep reading and you shall excel at them!
EDGESURF (edge-defined surface) serves as a positioning tool. It can help you add planar meshes to a closed entity with four edges. The edges can be arcs, lines, splines, open 2D or 3D polylines.
Steps to add meshes:
With the reference axes on the mesh, you can easily locate a point on your entity. Surveyors and landscape designers are bound to find it useful.
You can draw ellipses and elliptical arcs with ELLIPSE. Simple as this command is, some related technical terms might be confusing. Don’t fret! I made the diagram below to illustrate them. As you can see from the image below, the ellipse has two axes of symmetry, the major and minor ones.
Steps to draw an ellipse:
To draw an elliptical arc, simply input “A” after the above step 1, repeat the step 2-4 above to draw an ellipse, and cut it to get an arc by specifying the start and end angles.
By now you should have a better understanding of what this command can do.
EXPLODE enables you to break a compound object into its components in the simplest form. In this way, you can edit the components separately.
Speaking of editing, do you remember BEDIT? When I introduced to you CAD commands beginning with B, I explained how to edit blocks with it. However, when you use BEDIT, all blocks with the same name in the same drawing will change correspondingly. If you just want to edit some of the blocks without influencing the others, EXPLODE really comes in handy!
You can use EXTEND to join the lines. It is especially useful when you’re drawing grids.
See? With EXTEND, I can combine all the lines with the grid labels with ease. It provides second chances to you to adjust and fit objects.
This command is similar to EXTEND, but you can use it to create a 3D solid from a surface or a surface from a line in several ways. It will save you a lot of time if you use it to draw walls.
Before you invoke this command, make sure that you’ve switched to an oblique view.
As the GIF above shows, I created a surface from a line, a solid from a surface and an extrusion along a specified path.
What other CAD commands beginning with E do you find “e”fficient? “F”eel free to comment below!