Made of gold with a malachite base, the FIFA world cup trophy was the most shining attraction in this summer. Though the 2018 World Cup was over, our passion for soccer never ends. As a soccer fan and engineer, let’s learn the FIFA World Cup programming to enjoy the fun of programming and soccer.
Figure 1 World Cup
This article will focus on 5 Axis finishing processes after finishing rough machining.
Step 1: Create the 5axis semi-finishing process by 5X Sidecut command, take the part as a feature, and define a cutter as D4R2, as shown in Figure 2.
Figure 2 Create a 5X Semi-finishing Operation
Step 2: Set key parameters.
Primary Parameters: Set Surface thick to 0.1mm and Max Cut Depth to 1mm.
Axis Control Parameters: Set Guide Type to Cylinder, and set Guide Rule Guide Normal, as shown in the following figure.
Figure 3 Set Key Parameters
Step 3: After the parameters definition, we can directly calculate the operation to generate the tool path. The result is as follows.
Figure 4 Semi-finishing Tool Path
Step 4: Duplicate the semi-finishing operation to create the 5X Sidecut finishing process.
Figure 5 Create a 5X Finishing Operation by Duplication
Step 5: Just modify one primary parameter, set Surface Thick to 0, and then calculate finishing operation.
Figure 6 Finishing Tool Path
Step 6: Next, let’s carve a few words (start’s name or team name) on this cup. Back to CAD level then draw a sketch, such as”ZW3D”. Then wrap the curves to the surface to get the following result.
Figure 7 Wrap Curves
Step 7: In ZW3D, we could use the 5X Drive Curve operation to engrave these words. Add part as one feature, and then select curves as profile feature with Part type, as shown in the image Define tool as D1.
Figure 8 Define 5X Drive Curve Operation
Step 8: Turn off Lead-In and Lead-Out. Set other parameters to default. The tool path is shown below.
Figure 9 Tool Path of Lettering
Step 9: Let’s simulate the whole process by Solid Verify command.
Figure 10 Solid Verify